Introduction
Not all rack cabinets have the same depth. Some rack cabinets are shorter, some are deeper. That is the same with rackmount equipment. You never know what you are going to get until you actually install it in your cabinet. If you are lucky, it fits perfectly inside your rack cabinet. The chance are that your cabinet might be just a couple of inches deeper than your rackmount equipment supports. In this kind of situation, you will need a RACK EXTENDER. A rack extender is a pair “U” shaped brackets design to extend a section of the rear vertical mounting rails to reach your rackmount equipment's mounting brackets.
IAB102 is ideal for this situation when your rackmount equipment cannot reach front or rear vertical mounting rails. IAB102 offers you additional 2” extension depth you need to properly install your rackmount equipment.
IAB102 is engineered for use in any standard 19”, 23” or 24” rack cabinets. It is constructed with heavy duty 14 Gauge steel with a black powder paint finish. It has oval holes on one side supporting M5, M6, #10-32 and #12-24 rack screws. The square cage nuts holes on other side supports standard cage nuts such as M6, #10-32 and #12-24 for heavier weight support.
Our unique design allows customer to have direct access to mounting rack screw with bracket depth as short as 1.1”. Unlike design from other manufacture, angle screw driver from side of bracket is the only way to access mounting rack screws. Usually this installation method can lead to stripped screw head or loose screws.
In addition,
IAB102 comes in different sizes. It supports rack space from 1U up to 6U rack space. Please use our RACK extender selection guide to choose the right extender for your application.
We offer complete lines of rack extenders from 1U to 6U with depth ranging from 1.1” to 8” deep
Features
- Universal design works with any standard EIA-310 19 inch, 23 inch and 24 inch relay racks or 4-post racks
- No need to angle your screw driver to access rack screws inside the U bracket.
- Ultra-compact “U” shape design.
- Heavy duty 14 Gauge (1.98mm) steel.
- Vertical Rail side supports rack screws #10-32, #12-24, M4, M5, and M6
- Front side supports cage nuts #10-32, #12-24, M4, M5 and M6
- Supports standard EIA-310 rackmount equipment
- Extend 2 inch in depth
- Other sizes available. Click here for more info.
Specifications
|
|
IAB102V10-1U
|
|
|
1.2
|
|
|
1U
|
|
|
2 inch
|
|
|
14 Gauge, 1.98mm
|
|
|
EIA-310-D spacing oval rectangle holes x 6
|
|
|
EIA-310-D spacing square Cage Nut mounting holes x 6
|
|
|
44.45mm x 18mm x 50.80mm (1.75" x 0.7" x 2")
|
|
|
Black Powder Paint finish
|
|
|
150 LB Max.
|
|
|
(1 Pair) IAB102V10-1U, (4) 10-32 Cage nuts, (8) 10-32, and (4) 12-24 Rack screws.
|
|
|
1 LB
|
|
|
Limited 1 year warranty
|
Technical Document
|
|
Description
|
Download
|
|
1
|
IAB102V10-1U Dimensional Drawing.
|
 PDF
|
|
2
|
IAB102V10-1U Installation Manual
|
PDF
|
|
3
|
3D STEP and DWG files available upon request. Need major or minor modification? Call for detail.
|
Product Gallery
×
1 / 4
2 / 4
3 / 4
4 / 4
❮
❯
Application Note