Introduction

Most of the industrial control panel projects are unique and almost all requires custom build solution. For small custom build solution, it usually means higher cost and longer lead time. There is no way around it for custom build project until now. Introducing the new adjustable depth rackmount din rail panel. RCB1111BK15 offers traditional panel fabricator a way to reduce cost and shorten lead time for small and larger projects.

Our industrial control panel (ICP) solution offers simple and easy way to be integrate into any ICP design. Our Din Rail products are design specifically for industrial standard EIA-301 19” rackmount cabinet. Since, EIA-310 19” rackmount cabinet is widely used in the telecom and data center industry, panel fabricator or in-house engineer can easily order 19” cabinet from almost any e-retailer or local reseller at very competitive pricing.

EIA-310 19” cabinet offers excellent air flow, security and protection from environment. It is available in many sizes ranging from 13U up to 47U. The mounting platform can be as simple as a 2 Post relay rack to a fully enclosed 4 post cabinet with a build in air conditioning unit. With so many size and shape to choose from, you will not have any problem finding a suitable size enclosure for your project need.

HIGHLY CUSTOMIZABLE

Our DIN Rail Panel is design to be highly customizable in a 2 post relay rack or 4 post standard EIA310 19” server cabinet. It has several unique features such as adjustable mounting position for DIN Rail. RCB1111BK15 has integrated M4 PEM nuts at strategic locations on the panel which makes mounting DIN Rail or PVC Wire duct fast and easy. Additional mounting positions are available via the square cage nut holes on the panel. Our RSN1035K1 cage nuts kit is design to work with these square cage nuts holes. You can pop in RSN1035K1 cage nuts in the location where you need to install your DIN Rail or PVC Wire duct. RCB1111BK15 offers customization without drilling.

MORE for LESS

Our unique IRP1-CNB expansion brackets double your existing installation space without buying a new DIN Rail Panel. IRP1-CNB is design to utilize the empty space behind our DIN Rail Panel. Our Din Rail Panels have three mounting holes at top and bottom flange which works with IRP1-CNB brackets. Installation is fast and simple. IRP1-CNB use the same RSN1035K1 cage nut kit as our standard DIN Rail Panel. You can mount DIN Rail or PVC Wire duct at any height that is available. IRP1-CNB is especially useful if you have limited rack space to work with.

EASY ROUTING and ORGANIZE Wires

On both side of the Din Rail Panel, two large cable access holes are available for routing cable into your server rack. Additional cable access holes are also available on the din rail panel. Our Din Rail panel offers the simplest way to route, organize, and store large bundles of cable and wires for your project.
RCB1111BK15 can help you to deploy your small or large project with in your project time frame and within budget.

OPTIONAL COVER

Our DIN Rail Panels works with IRP1-FPK to turn our RCB1090-3U 3U filler panel in to a cover panel for our DIN Rail Panel. The IRP1-FPK comes with necessary hardware to mount RCB1090-3U onto our DIN Rail Panel. This gives your DIN Rail equipment additional protection.