Introduction
The RSF1120K3V2 4 Post low profile adjustable rails provides a simple, low cost solution for managing your Desktops, Mini-Towers and non-rackmountable equipment in a standard 19”, 23” or 24” EIA rack. Traditional rack shelf occupied at least 1U of rack space for use on any type of Desktop PC, Mini-Towers and non-rackmountable equipment. If you wish to reduce the rack space size, your equipment must have mounting holes on both side to support a pair of 19” or 23” rack ear (L bracket). If your non-rackmountable equipment or computer system do not have the right mounting holes or rack ear support, RSF1120K3V2 might be the solution for you. RSF1120K3V2 is design specially for mounting desktop computer, mini tower computer and non-rackmountable equipment in a standard rack. Its low profile design occupied less than 1U of rack space. It functions just like a standard rack shelf except it uses minimum amount of rack space.
The new and improved RSF1120K3V2 offer several new features over our origional RSF1120K1 rail.
Universal Rack Support
RSF1120K3V2 is design to support various depth 4 post rack cabinet from 17” up to 38” in depth. Our unique S body rail design and use of heavier 14 gauge sheet metal ensures proper weight support in any depth adjustment.
Anti-sliding feature
Most of the fixed or adjustable rail or shelves have open end at front and back. There is nothing to stop your equipment from sliding off the rail or shelves. Our RSF1120K3V2 offers anti-sliding bracket and hook holes for bungee cords to reduce sliding issue. You can install our anti-sliding bracket on front and back of our rail bracket to keep your equipment secure in place. You can also use bungee cord to further restricting movement in the rack.
Rear support bracket
RSF1120K3V2 has 2.5" x 16" deep supporting flange for most of network or computer equipment. If you have a equipment longer than 20", you will need to install a rear support L bracket. The rear support bracket offers additional safety support for your equipment. You do not want to have your equipment with more than 50% of bottom area floating in the air without support.
Horizontal Adjustment bracket
You can reduce horizontal movement with our horizontal adjustment bracket for your equipment, mini Desktop and Tower Case. You can adjust the bracket to match width of your equipment.
RSF1120K3V2 is ideal for 1U, 2U, 3U or 4U lightweight network equipment, telecom equipment, computer servers, and workstations installation. No drilling into your equipment required. You simply slid your equipment in and you are done. In short, RSF1120K3V2 offers rack mounting support at an affordable price.
Features
- Universal design works with any standard EIA-310 19 inch, 23 inch, and 24" relay racks or 4-post racks
- Low Profile Design.
- Adjustable rear sliding bracket supoorts cabinet depth from 17" up to 30"
- 14 Gauge (1.97mm) steel.
- Additional Rear Support for longer equipment.
- Additional flange on main bracket offers better weight support and reduce saging in the middle issue.
Specifications
|
|
RSF1120K3V2
|
|
|
1U
|
|
|
16.79" (min)
|
|
|
38"
|
|
|
14 Gauge, 1.97mm
|
|
|
Black powder paint finish
|
|
|
150 LB Max. @ 30" depth
|
|
|
(1) RSF1120K3V2, and (8) 10-32 screws.
|
|
|
10 LB
|
|
|
Limited 1 year warranty
|
Technical Document
|
|
Description
|
Download
|
|
1
|
RSF1120K3V2 short depth setup Drawing.
|
 PDF
|
|
2
|
RSF1120K3V2 extended depth setup Drawing.
|
PDF
|
|
3
|
RSF1120K3V2 Equipment width requirement.
|
PDF
|
|
4
|
3D STEP and DWG files available upon request. Need major or minor modification? Call for detail.
|
Product Gallery
×
1 / 8
2 / 8
3 / 8
4 / 8
5 / 8
6 / 8
7 / 8
8 / 8
❮
❯
Application Note