CONVERTS ANY LCD INTO RACKMOUNT MONITOR for ALOT LESS
Not all of your application needs to use an expensive rackmount monitor. A simple LCD monitor might just do the job. Here is where our RLCD-FRAME2 comes in. RLCD-FRAME2 provides a simple, low cost means to mount standard or wide screen LCD monitor into a standard 19” rack enclosure. It supports standard LCD monitor up to 18”. As long as your LCD monitor is not wider than 17.36”, you can flush mount it. If you need to use a wide screen monitor, you can readjust our RLCD-FRAME2 bracket to extend it outward. This gives you additional clearance between your monitor and front side of your rack cabinet. For a non- flush mount setup, it supports Wide Screen monitor up to 32 inch*
The key advantage for using our RLCD-FRAME2 is the flexibility to use any type of standard LCD or wide screen monitor with VESA mount support (either 75mm x 75mm or 100mm x 100mm) on the market that does not exceed max weight of 30 LB. You are not locked into a propriety LCD rackmount monitor. Using a standard LCD monitor gives you more video interface options such as VGA, DVI, HDMI, display port, or S-Video connector. In addition, you can also select monitor that comes with build in speaker or touch screen features. These features can be a huge cost saving for you compares with using a rackmount LCD monitor with the same features.