RCB1060-5U 5U 23" to 19" rack reducer with pre-installed 10-32 nuts
for 23" wide server rack. (1 pair)
ONLINE ORDER
| Model # | Description | Price | Add to Cart |
|---|---|---|---|
| RCB1060-5U | 5U 23" to 19" rack reducer with pre-installed 10-32 nuts. | $35.75 | BUY |
Features
- Compatible with standard EIA310D 23-inch wide 2 post relay rack and 4 post server racks
- #10-32 PEM nuts preinstalled on the equipment side. Supports #10-32 screw
- OB slots on the cabinet side offer additional installation flexibility for rack equipment that is either slightly narrower or wider.
- OB Slots support #10-32, #12-24, and M6 rack screws..
- 5.5mm mounting holes located between the OB Slots are compatible with #10-32, #12-24, and M6 rack screws.
- Constructed from CRS steel with a 16-gauge thickness.
- Black Powder-coated textured finish.
- Converts 23" wide cabine to accept standard 19" wide equipment.
- Made in USA
Overview
Interoperability
As technology has advanced and equipment has become more compact, the demand for wider cabinets has decreased. However, if you have an existing 23-inch wide cabinet and you want to utilize it for commonly used 19-inch rack equipment, you can achieve this by employing the RCB1060 rack reducer. The RCB1060 serves as the solution to modify the 23" opening, making it smaller to accommodate your new 19" rack equipment. By utilizing the RCB1060, you can effectively complete your installation and ensure a proper fit for your equipment.
Versatility
The RCB1060 features #10-32 PEM Nuts preinstalled on the equipment mounting side. Preinstalled #10-32 nuts provide several advantages, including easy installation and removal, no need to install additional cage nuts. RCB1060 is ready for mount your 19" network equpments.
Better Fit
Server cabinets and equipment often come in different designs, and it's possible that your new equipment may be wider or narrower than the cabinet opening. Since adjusting the width of the cabinet or modifying the width of the new rack equipment is not feasible, the RCB1060 offers a solution with its (#2) OB slots design. The OB slots allow you to make the necessary width adjustments, ensuring a painless installation process. With the flexibility provided by the OB slots, you can easily accommodate the varying widths of your equipment and achieve a proper fit within the cabinet.
Save Money
Your unused 23” telecom 2 post relay rack or 4 post cabinet can be reused for mounting industrial standard 19” rack equipment and accessories. Your 23” telecom cabinet offers the exact same features as a standard 19” rack cabinet. The only difference is the width. By using our RCB1060 rack reducers, you can save huge cost for a new 19” cabinet as well as the cost for transporting it. RCB1060 offers sizes from 1U up to 5U which means that you only buy what you need to install your 19” rack telecom or network equipment for your project need. It is a win-win scenario for recycle existing equipment and saving money at the same time.
Packed with features
The RCB1060 is designed with small networking equipment in mind. On the rack's vertical rail side, it features both 5.5mm holes and oblong slots. The oblong slots are ideal for situations where your 23” rack cabinet is slightly too wide or narrow, allowing you to adjust the width to match your 19” rack equipment. The 5.5mm holes provide a more secure mounting point, minimizing bracket movement under heavier loads. On the equipment side, #10-32 PEM nuts are preinstalled with standard rack spacing. These preinstalled PEM nuts help reduce installation time. For installation, one pair of RCB1060 is required for a 2-post relay rack, while two pairs are needed for a 4-post rack cabinet to support both the front and rear. .
Specification
| Model | RCB1060-5U |
|---|---|
| Revision | 1.1 |
| Rack Size | 5U |
| Thickness Model | 16 AWG (1.59mm) |
| Cabinet Side | 5.5mm holes and oblong slots. Support #10-32,#12-24 and M6 rack screws |
| Equipment Side | #10-32 PEM Nuts preinstalled. Support #10-32 screw. |
| Finish | Black Powder Paint finish |
| Max Load Capacity | 30 lb MAX for equpment with 8 inch depth install on 2 post relay rack (2 brackets). 100 lb MAX for 4 post cabinet (4 bracktes configuration) |
| Dimension H x W | 8.735" x 2.756" (221.95mm x 70mm) |
| Hardware Included | (4) #10-32 Screw, and (4) #12-24 Screw. |
| Country of Origin | United States (US) |
| HTS Code | 8302500000 |
