CAB-FDDIDE-C1 34-Pin Floppy 19-inch ribbon cable & 40-Pin Ultra ATA 18-inch IDE Cable Kit
for legacy Floppy and IDE drive
ONLINE ORDER
| Model # | Description | Price | Add to Cart |
|---|---|---|---|
| CAB-FDDIDE-C1 | 19-inch Floppy Ribbon and 18-inch Ultra ATA IDE Ribbon Cable Kit | $10.00 | BUY |
Features
- (1) 34-pin floppy drive ribbon cable with (2) 34-pin keyed IDC connectors.
- Compliant with UL standard AWM E101344 , VW-1 flame rating.
- Rated for 105°C temperature and 300V voltage.
- (34) 28 AWG wire .
- Length: 19 inches.
- Supports up to 1 floppy drive.
- (1) 40-pin IDE ribbon cable with (3) 40-pin keyed IDC connectors .
- Compliant with UL standard AWM E101344 ,VW-1 flame rating
- Rated for 105°C temperature and 150V voltage
- (80) 30 AWG wire.
- Fully compatible with Ultra ATA 40-pin IDE CD-ROMs and hard Drives
- Supports up to 1 mast and 1 slave IDE device.
Floppy Drive Ribbon Cable:
IDE Drive Ribbon Cable:
Overview
Legacy Compatibility
CAB-FDDIDE-C1 is a legacy ribbon cable kit designed for floppy drives and IDE storage devices. While technology has advanced, many users still rely on legacy computer systems to support their operations. The CAB-FDDIDE-C1 cable kit provides IT professionals and DIY enthusiasts with a reliable solution to extend the functionality of older hardware. Whether you're working with a 1.44MB floppy drive or an IDE hard drive from Western Digital or Seagate, CAB-FDDIDE-C1 is the cable set you need to bring your legacy devices back to life.
Floppy
The CAB-FDDIDE-C1 Floppy Cable is designed for use with standard 3.5" 1.44MB floppy disk drives featuring a 34-pin interface.
- Includes (2) 34-pin female IDC connectors with standard 2.54mm pitch
- Equipped with 40-pin non-keyed IDC connectors.
- Features a cable twist near the end to designate the A drive position
- Non-keyed connectors: Ensure the red stripe on the ribbon aligns with pin 1 on both the drive and motherboard headers
Note: If your motherboard uses a smaller 2.00mm pitch 34-pin connector, please use our CAB-FDD2MIN12 floppy drive cable instead.
IDE
The CAB-FDDIDE-C1 IDE Cable is a high-performance Ultra ATA ribbon cable designed for full compatibility with Ultra ATA/66 and higher-speed devices, including hard drives and CD-ROM/DVD-ROM drives.
- Constructed with 80-wire, 30 AWG ribbon cable for improved signal integrity and reduced interference.
- Equipped with 40-pin keyed IDC connectors to ensure secure and accurate connections.
- Supports Ultra ATA/33, ATA/66, ATA/100, and ATA/133 data transfer rates
Important Note: This cable is not compatible with standard IDE/ATA devices that use 40-wire ribbon cables. Due to the keyed IDC connectors and 80-wire configuration, it should only be used with Ultra ATA-compliant hardware.
Specification
| Model | CAB-FDDIDE-C1 |
|---|---|
| Floppy Cable type | (2) 34-pin IDC connector 2.54mm pitch. |
| Floppy Device Supported | 1 Floppy Drive |
| Floppy Cable Length | 19 inch |
| IDE Cable Connector type | (3) 40-pin IDC connector 2.54mm pitch. (Keyed for Ultra ATA drive) |
| IDE Device Supported | (2) Ultra ATA device for master and slave drive |
| IDE Cable Length | 18 inch (6 inch in between master and slave connector) |
| Country of Origin | China |
| HTS Code | N/A |
