RCB1065S-3U 3U 23" to 19" Rack Reducer

1U Rack Reducer
ONLINE-ORDER
Model# Description Price
RCB1065S-3U 3U 23" to 19" Rack Reducer $22.00 BUY
Video



Introduction

If you have a 23” telecom 2 post relay rack or 4 post rack cabinet and you want to install a 19” rack equipment on it, your 23” cabinet is too wide. You need to make the 23” opening smaller to fit your new 19” rack equipment. In this kind of situation, Rack Reducer is what you need to complete your installation.

PICTURE
Rack Redcer installed

What is Rack Reducer

Rack Reducer is a simple bracket which bridging the gap opening between your 19” wide rack equipment to the 23” wide telecom cabinet. Basically, you have a 2” wide brackets install on right and left hand side of your 23” wide telecom cabinet. This bracket allows you to mount a 19” wide rack equipment into a 23” wide 2 Post Relay Rack or 4 post telecom cabinet.

Save money by reuse your 23" cabinet

Your unused 23” telecom 2 post relay rack or 4 post cabinet can be reused for mounting industrial standard 19” rack equipment and accessories. Your 23” telecom cabinet offers the exact same features as a standard 19” rack cabinet. The only difference is the width. By using our RCB1065S rack reducers, you can save huge cost for a new 19” cabinet as well as the cost for transporting it. RCB1065S offers sizes from 1U up to 6U which means that you only buy what you need to install your 19” rack telecom or network equipment for your project need. It is a win-win scenario for recycle existing equipment and saving money at the same time. .

PICTURE
RCB1065S Featrues

Packed with Features

RCB1065S is design for small net working equipment in mind. On the vertical rail side, it comes with both circle holes as well as oblong holes for mounting your 23” cabinet rack screws. The circle holes are the primary mounting holes for RCB1065S. It supports #10-32, #12-24 and M6 rack screws. This hole ensures that our brackets does not move or shifting position after installation. The Oblong slots are for width adjustment if your cabinet is not exactly 23” wide or the rack equipment is not exactly 19” wide. The oblong slots also provide addition weight support. RCB1065S can be use in both 4 Post cabinet as well as 2 Post relay rack. Please review application note below to determine if our bracket is suitable for your application need.
On the equipment side, it comes with 9.5x9.5mm square cage nut holes. They are compatible with 10-32, 12-24 and M6 cage nuts. The spacing between square holes comply with EIA310 rack spacing standard. mounting hardwares are included.

Specifications

RCB1065S-3U
3U
14AWG (1.98mm)
Circle and Oblong Slots. Supports #10-32, #12-24 and M6 rack screws.
9.5x 9.5mm square cage nut holes. Supports #10-32, #12-24 and M6 Cage Nuts.
Galvanized Steel.
5.25" x 2.638" (133.35mm x 67mm )
90 lb Max for equipment with 8" depth install on a 2 post relay rack (2 brackets), 100 lb max for 4 post cabinet (4 brackets configuration).
United States (US)
Limited 1 year warranty

Technical Document

Description Download
1 RCB1065S-3U CAD Drawing. PDF

1U Rack Reducer
1U Rack Reducer


Application Note

Installation for 4 Post Cabinet.
Required Brackets: 2 Pairs ( 4 Brackets )
Max Weight Capacity: 100 lb Max evenly distributed
Installation Method: 2 brackets at front and 2 bracket at rear.
Installation Note: RCB1065S is design for light weight networking equipment. It does not work with heavy equipment such as UPS Battery back up, or large enterprise network equipment.


Installation for 2 Post Relay rack.
Required Brackets: 1 Pair. (2 Brackets)
Max Weight Capacity: 90 lb Max
Installation Method: Flush mount ( Front mount )
Equipment Depth: 6" MAX
Installation Note: RCB1065S is design for light weight networking equipment. It dos not work with heavy equipment such as UPS Battery back or equipment depth deeper then 8". If you install equipment with 8" or deeper at 90 Lb weight, the brackets will bend.