Not all rack cabinets have the same depth. Some rack cabinets are shorter, some are deeper. That is the same with rackmount equipment. You never know what you are going to get until you actually install it in your cabinet. If you are lucky, it fits perfectly inside your rack cabinet. The chance are that your cabinet might be just a couple of inches deeper than your rackmount equipment supports. In this kind of situation, you will need a RACK EXTENDER. A rack extender is a pair “U” shaped brackets design to extend a section of the rear vertical mounting rails to reach your rackmount equipment's mounting brackets.
IAB110 is a universal depth adjustable rack extender. It is ideal for bridging gap between your rack equipment and your front or rear vertical mounting rail. The IAB110V10-4U comes with two brackets. The main brackets is using our IAB106V10-4U and a 5 inch rear “L” adjustable brackets. IAB110V10-4U includes all of the features offer by IAB106V10-4U. In addition, the rear “L” brackets have oblong slots which makes IAB110 adjustable from 6.375 inch to 10.5 inch. Both brackets are joint together by #10-32 machine screws with nylon insert locknuts. The nylon insert locknuts lessen the chance that the nuts might become loose due to vibrations.
IAB109 is engineered for use in any standard 19”, 23” or 24” rack cabinets. It is constructed with heavy duty 14 Gauge steel with a black powder paint finish for durability. It has oval holes on one side supporting M5, M6, 10-32 and 12-24 rack screws for mounting to cabinet rail. The square cage nuts holes on other side supports standard cage nuts such as M6, #10-32 and #12-24 for heavier weight support.
We offer complete lines of rack extenders from 1U to 5U with depth ranging from 1.1” to 10” deep