Introduction

Most of the industrial control panel projects are unique and almost all requires custom build solution. For small custom build solution, it usually means higher cost and longer lead time. There is no way around it for custom build project until now. Introducing the new rackmount slotted panel. IRP1033V offers traditional panel fabricator a way to reduce cost and shorten lead time for small and large projects.

Our industrial control panel (ICP) solution offers simple and easy way to be integrate into any ICP design. Our Din Rail products are design specifically for industrial standard 2 post relay rack, and 4 Post EIA-301 19” rackmount cabinet. Since, EIA-310 19” rackmount cabinet is widely used in the telecom and data center industry, panel fabricator or in-house engineer can easily order 19” cabinet from almost any e-retailer or local reseller at very competitive pricing.

EIA-310 19” cabinet offers excellent air flow, security and protection from environment. It is available in many sizes ranging from 13U up to 47U. The mounting platform can be as simple as a 2 Post relay rack to a fully enclosed 4 post cabinet with a build in air conditioning unit. With so many size and shape to choose from, you will not have any problem finding a suitable size enclosure for your project need.

NO DRILLING REQUIRED

One of the advantage for using our adjustable depth slotted panel is no drilling required. It is not a precision way to mount your equipment but it gets the job done. You can either use plastic cable ties or M4 screws with hex nuts to secure your equipment through these slits. This method is a faster and more cost effective way for prototyping your design.

Our adjustable depth design gives you the options to mount the slotted panel recessed, centered or flushed mount position. You can add additional panel to maximize installation space.

MORE for LESS

IRP1033V is an excellent option for project that does not have a lot of room to work with. You can double its installation capacity with an optional IRP1-CNB expansion brackets. It has three mounting holes on top and bottom flange of Solid Panel design for IRP1-CNB. IPC Designer can utilize the empty space behind IRP1033V to mount additional DIN Rail modules.

Multiple Cover Options

Two different type of cover panels are available for our Din Rail Panel. One is removable cover option. Combination of IRP1-FPK kit and RCB1090 filler panel offers designer option to include removable cover panel for safety and protection of your sensitive electronics. IRP1-FPK comes with plastic spacers and extra long #10-32 screws to mount RCB1090 filler panel in front of our DIN Rail Panel properly. Plastic spacer raises the filler panel to cleared the #10-32 mounting screw securing the DIN Rail panel. This mounting method allows RCB1090 filler to be removed without removing DIN Rail Panel.

For application that does not allows removable cover panel, designer can use IRP103S or IRP103V panel. IRP1033S has mounting holes on four corners of the “L” brackets that works with IRP103S or IRP103V panel. Once IRP103S or IRP103V is mounted, the only way to remove it is to detach IRP1033S completed from the server rack to gain access to IRP103S or IRP103V panel. Since IRP103S is detachable, installer can place it on a drill press to custom punch holes for LED status light, switches or instruments. IRP103S give designer more customization options.