Overview The TMS-365 is an industrial rackmount PC design specifically for replacing your existing DOS 6.2, Windows 98, CE, Windows 2000, and NT 4.0 control system. The TMS-365 features a 800 Mhz x86 SOC processor with build in 512MB DDR2 memory which is critical for running legacy application. Featuring an internal 14 slots ISA bus, and choice of communication buses ( serial, parallel, USB and Ethernet). It can be configured to address the requirement of your legacy system. The TMS-365 ships with 512MB memory, an 80GB IDE Hard Drive, 52X CD-ROM, 1.44MB floppy drive and USB floppy emulator.
TMS-365 works with half-length ISA or full-length ISA boards. TMS-365 supports up to 12 ISA full-length ISA board. It also comes with a (3) large 120mm high CFM cooling fan located in the middle of the chassis for proper thermal management.
TMS-365 incorporates FDE-QNX floppy drive emulator to save your DOS, Windows 2000 or windows NT 4.0 floppy disk files to a USB thumb drive.
Beside our standard system configuration, we also offer custom build industrial system solution to meet your project requirement. We have been in custom build industrial PC solution for over 20 years. We specialize in custom build replacement system for your ageing industrial control PC. Most of our customer need customer build solution because they have invested a lot of money and energy into their existing capital equipment. Sometimes replacing it is simply out of question and way too costly. Replacing existing industrial control PC on the other hand is a cost effective method to bring new life into your capital equipment investment. In addition, by upgrading your industrial control PC, you can reduce system down time usually associated with ageing system. The investment for a new industrial PC will pay for itself in the long run. Give us a call and see if we can help you to build a new industrial control PC. If you let us know what you need. Usually we can come up with a solution to your requirement. .
|Vortex86DX 800 Mhz|
|512MB DDR2 (Max)|
|80GB IDE HDD (Removable)|
|(1) 3.5" FDD, (1) 3.5" FD Emulator, 52X CD-ROM and (1) CF Reader.|
|(3) RS-232 9 pin, (1) RS-232/422/485, (1) Parallel port, (4) USB 2.0 , and (1) 16-bit GPIO port|
|RJ45 RL8100B 10/100BaseT Ethernet|
|XGI Voiari Z8s Chip set w/ 32mb video RAM|
|(12) full-length ISA 16 bit slot, (1) PC/104|
|(1) PS2 keyboard, (1) PS2 Mouse connector|
|(5) 5.25" half height drive bay|
|MSDOS 6.2, windows 98, windows 2000, NT 4.0 and Linux|
|115 or 220 VAC ( manual switch)|
|50 to 60 Hz|
|AT (on/off switch)|
|0 to 50 C ( 32 to 122 F)|
|-20 to 60 C ( -4 to 140 F)|
|5 to 85% @ 40 C (noncondensing)|
|(3) 120mm fan|
|26" (D) x 17" (W) x 7" (H)|
|Cold Roll Steel|
|Black Power Paint finish|
|Limited 1 year warranty|