The SBC470C is a low speed ISA single board computer design specifically for replacing your existing DOS 6.2 or QNX 2.0 control system. The SBC470C features a slow speed 300 Mhz x86 SOC processor with build in 128MB DDR2 memory which is critical for running legacy application. It offers choice of communication buses ( serial, parallel, USB and Ethernet). It can be configured to address the requirement of your legacy system.
SBC470C works with standard 16 bit ISA backplan boards. It does not work directly with ATX power supply. Your ISA backplan board must have a special ATX power supply jumper in order to proprely power on SBC470.
ISA has 2 difference type of interface, 8 bit and 16 bit. Typically 8 bit ISA card is pin compatible with 16 bit ISA slot. However, you might not be able to use 16 bit card in a 8 bit ISA slot. SBC470 only support 16 bit ISA slot.
Besides offering industrial parts as replacement, we also offers custom build industrial system solution to meet your project requirement. If you are not sure about how to integrate a new industrial motherboard in to your existing system, we can help. We have been providing custom build industrial PC solution for over 20 years. We specialized in custom build industrial system. We can help you to select the best fit solution for your need. You can either call at (516) 997-5050 or e-mail at email@example.com for any type of questions.
|ISA 300 Mhz Soc SBC Card W/ 128MB Memory, VGA, Ethernet and FD controller||$469.00||Buy|
|ISA 300 Mhz Soc SBC Card W/ 128MB Memory, VGA, Ethernet and no FD controller||$369.00||Buy|
|300 Watts AT Power Supply (P8, P9) connector||$50.00||BUY|
|ATX to AT power cable converter||$20.00||BUY|
|Vortex86SX 300 Mhz (math coprocessor not included)|
|128MB DDR2 (Max)|
|(1) 34 pin FD Controller, (1) 40 pin PATA controller, and (1) CF Reader.|
|(3) RS-232 9 pin, (1) RS-232/422/485, (1) Parallel port, and (1) 16-bit GPIO port|
|RJ45 RL8100B 10/100BaseT Ethernet|
|XGI Voiari Z8s Chip set w/ 32mb video RAM|
|(1) ISA 16 bit slot, (1) PC/104|
|(1) PS2 keyboard, (1) PS2 Mouse connector|
|MSDOS 6.2 and QNX2|
|0 to 60C|
|-20 to 70C|
|5 to 85% @ 40 C (noncondensing)|
|NO addition CPU heatsink required|
|Limited 1 year warranty|